English –
4
EN
5.6 -
Manual adjustment
of upper limit switch height (“0”) and lower height (“1”)
Warning
:
– This procedure overwrites previously adjusted heights with the new heights using this same procedure.
– Every time the motor is powered, 2 movements are performed if at least one transmitter and the limit switch heights are not in the memory.
5.6.1 - To adjust the UPPER limit switch (“0”)
Before starting the procedure, bring the awning to the midpoint of its stroke.
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02.
Keep the
n
key pressed again and wait for the motor to perform 4 movements. Upon completion, release the key.
03.
Keep the
s
key pressed and wait for the motor to perform two movements. Upon completion, release the key.
04.
Adjustment of the position
:
keep the
s
(or
t
) key pressed until the awning reaches the desired “0” height.
Note
– to adjust the height with precision, press
the
s
and
t
keys several times consecutively (at each pulse the awning moves a few millimetres).
05.
Keep the
n
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
5
sec.
01
04
02
05
5
sec.
03
5
sec.
“
0
”
5
sec.
2
2
4
3
Note
– When performing the procedure, at any time you can cancel it by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
5.6.2 - To adjust the LOWER limit switch (“1”)
Before starting the procedure, bring the awning to the midpoint of its stroke.
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02.
Keep the
n
key pressed again and wait for the motor to perform 4 movements. Upon completion, release the key.
03.
Keep the
t
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
04.
Adjustment of the position
:
Keep the
t
(or
s
) key pressed until the awning reaches the desired “1” height.
Note
– to adjust the height with precision, press
the
s
and
t
keys several times consecutively (at each pulse the awning moves a few millimetres).
05.
Keep the
n
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
5
sec.
01
04
02
05
5
sec.
03
5
sec.
5
sec.
“
1
”
2
2
4
3
Note
– When performing the procedure, at any time you can cancel it by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
––––––––––
Note
– After the adjustments, the
s
key will command the Raising motion and the key
t
key will command the Lowering motion. The awning will move within the lim-
its constituted by the two limit switch heights.
