39
This procedure allows slight mechanical adjustment of the gate’s closing angle by extending or retracting the main arm.
1.
Using a 2.5mm or 3/32 hex key, turn the locking bolt on the side of the arm counter-clockwise to release the adjustment knob.
2.
Rotate the knob as shown to increase or decrease the length of the main arm. NOTE: Do not extend the main arm more than 2"!
3.
Using a 2.5mm or 3/32 hex key, turn the locking bolt on the side of the arm clockwise to lock the adjustment knob in place.
36 - MECHANICAL ADJUSTMENT OF GATE CLOSING POSITION
1
2
3
21" MINIMUM
WIDTH
DIMENSION
Figure 35 - COMPACT INSTALLATION
Summary of Contents for Apollo 4300SW
Page 2: ......
Page 40: ...38 35 GATE ARM INSTALLATION Figure 33 CORRECT LAYOUT INCORRECT INSTALLATION Figure 34...
Page 44: ......
Page 45: ......
