Nice Apollo 4300SW, Manual

Page: 29 / 46

27
ON
2 FREQUENCY IRB-RET
NO
NC
C
E
VRX
COM
1 2 3 4
1050 BOARD
In1 (16) or In2 (18)
GND (17 or 19)
24V (20)
GND (21)
1. Press “Functions”
2. Select #3 “Auxiliary IO” and Press “OK”
3. Select “In Aux 1” (or “In Aux 2”) and Press “OK”.
4. Select Open Pule or Close Pulse and “Press OK”
5. Connect 300Hz Monitored Safety Device to In1 (16) or
NOTES:
*Only one monitored (Pulse) device may be connected per input at In1 or In2.
*At least one monitored device must be connected properly to 1050 boards that are UL325 7th Edition in order to
complete the “Learn” mode. A “BlueBus Error” will result if this requirement is not met.
In2 (18) accordingly.
21 - IRB-RET Wiring Diagram