NF FRA5087, Instruction Manual

Page: 111 / 194

4.14 Output to printer
FRA5087
4-37
c) Loading printing paper
Load the printing paper in the printer (loading of printing paper) as described in this paragraph.
Turn the lever at the right-hand side of the printer so that it is in vertical position, and insert
printing paper from the lower side of the platen. In doing so, slightly move the paper to the
right and to the left several times, so that the paper can be inserted under the platen smoothly.
Fig. 4-23 shows the paper loading as viewed from the front panel. Hold the top edge of the
printing paper that has come out from the head and pull the paper up further by approximately 5
cm. Pay attention in that the paper is placed perpendicular to the shaft and the head of the
printer.
Turn the lever to the
vertical position.
Head
Platen
(rubber roller)
Printing paper
Insert printing paper from
the lower side of the platen.
Return the lever to
horizontal position
Fig. 4-23 Loading printing paper
Return the lever to the original horizontal position, after you have completed loading the
printing paper. Printing can be made only when the lever has been restored to the perfectly
horizontal position.
d) Restoring cover
Restore the printer cover to the original position, after inserting the top portion of the printing
paper through the cover slit (i.e., wide rectangular hole through which printing paper comes
out). Turn the stopper in the horizontal direction to press the lid into the cover to where a
clicking sound indicates the lid is secure.
Printer paper Stopper
Turn the stopper horizontally
and close the lid
Fig. 4-24 Cover attachment