NF FRA5087, Instruction Manual

Page: 148 / 194

6.4 Software for reading files
FRA5087 6-14
6.4.1 Installation
While this software can operate being installed in the floppy disk, it is recommended that you
operate the software installed in the hard disk or the network drive, since the latter will provide
you with faster operation speed.
a)
Preparing folder
Prepare/create a folder such as “C:
＼
Program Files
＼
DSPL5090.CFG”, for example, in the
hard disk or the network drive.
b) Software download and extraction
Download the file reading software, "DSPL5090" from our support website
(http://www.nfcorp.co.jp/support/download.html) to a folder you have created.
Extract the files that are archived in LZH format into the created folder, using appropriate
extraction software.
c) Adding to start menu, etc.
Add “DSPL5090.EXE” in the start menu and/or add its shortcut on the desktop, as you need,
to more conveniently use the software.
Refer to the instruction manual for Windows for more details on the adding procedure.
6.4.2 Uninstallation
The uninstalling procedure of this software is so structured that you only need to uninstall those
folders, files or shortcuts that have been added through the procedure of
“6.4.1 Installation” .
a)
Deleting installation folder and/or software
If the folder that has been prepared for installation involves only the files of
“DSPL5090.EXE” and “DSPL5090.CFG”, delete the whole folder. If you have additional
files that are needed, delete only the files of “DSPL5090.EXE” and “DSPL5090.CFG”.
b)
Deleting added items
Delete those items that have been added to the start menu and the desktop, if any.