NF FRA5087, Instruction Manual

Page: 20 / 194

1.3 List of functions
FRA5087 1-4
1.3 List of functions
The following shows a list of important functions of the instrument. Thereunder, the function tree
of instrument functions is illustrated.
Functions general descriptions
Oscillator subsystem OSC Setting parameters of built-in oscillator such as
frequency and amplitude
Analyzer subsystem input
Input Setting analyzer input parameters such as excessive
level detection threshold
Measurement control Measure Setting sweeping parameters, number of integration
times, etc.
Graphic display control
Graph Setting graphic display format, etc.
Calculation Calc Calculation of measurement data
Memory Memory Storing measurement data into internal memory, etc.
Output control Output
Functions related to GPIB and printed output
Disk Disk Functions related to USB flash drive
Calibration Calib. Automatic calibration capabilities
Automatic sequencing Autoseq Automatic process execution in sequence
Others Others
Setting time, etc.
Oscillator subsystem
OSC
Output on AC/DC ON
AC/DC OFF Output off
On/off mode
Frequency
Amplitude
DC bias
Stop mode
Waveform
AC OFF
QUICK/SLOW
ZERO
HOLD
PHASE START/STOP phase
Sinusoidal waveform
Rectangular waveform
Triangular waveform
Analyzer subsystem input
Input
Excessive
level detection
CH1 detection level
Input channel
weighting
Actions buzzer
CH2 detection level
buzzer
stopping sweep
oscillator output off
CH1 coefficient
CH2 coefficient
Phase invert