NF FRA5014, Instruction Manual

Page: 15 / 107

1.3 List of Functions
FRA5014 1-3
1.3 List of Functions
A tree diagram of functions is shown below.
Oscillator AC/DC ON
AC/DC OFF
AC OFF
Frequency
AC amplitude
DC bias
rms/peak switch
Sweep
UP
measurement DOWN
STOP
Frequency axis
Upper limit frequency
Lower limit frequency
Frequency points
Spot
CH2/CH1 Upper limit of acceptable gain range
measurement CH2/CH1 Lower limit of acceptable gain range
CH3/CH1 Upper limit of acceptable gain range
CH3/CH1 Lower limit of acceptable gain range
CH4/CH1 Upper limit of acceptable gain range
CH4/CH1 Lower limit of acceptable gain range
CH2/CH1 Upper limit of acceptable phase range
CH2/CH1 Lower limit of acceptable phase range
CH3/CH1 Upper limit of acceptable phase range
CH3/CH1 Lower limit of acceptable phase range
CH4/CH1 Upper limit of acceptable phase range
CH4/CH1 Lower limit of acceptable phase range
Measurement
Integration time
settings Integration cycle
Delay time
Excessive
CH1 detection level
input CH2 detection level
CH3 detection level
CH4 detection level
Action when detected ERROR lamp ON
BEEP
STOP
OSC OFF