Nexcom NIO200 HAG User Manual Download Page 35

Page: 35 / 120

NIO200 HAG User Guide

Page 35 of 120

Follow the Commands Log link to see the response of the command.

6.5 Network Health

The Network Health page provides a communication health report at network level.

The page consists of two sections containing network summary statistics and device-specific

communication health information.

In the network summary section the following information is indicated:



Devices Count

– the total number of registered devices, including the Access Point,





Join count

– the total number of joins of all the devices in the network,





Start Date

– the date and time the Network Manager application was started,





Current Date

– the present time,





Transmission and reliability statistics, based on the summary report per device.



Summary of Contents for NIO200 HAG

























































































































Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands

Nexcom NIO200 HAG, User Manual

Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands