NIO200 HAG User Guide
Page 49 of 120
If the Join Key is unique per network, any device that has the correct key provisioned, regardless of its
network address, will join the network.
If the Join Key differs from device to device, you must enter the correct EUI-64 address and join key
for each device, for the devices to be able to join. Afterwards, click Save to save the data in the
“whart_provisioning.ini” file.
At the end, click Activate, to activate the configuration settings.
.
7.4.1.
Configuring Access Point
To add an Access Point in the network, type its EUI64, security key, and Network ID in an empty edit
box and click
Save.
The new Access Point will be added to the Access Points list.
To edit an Access Point:
1. Click on the entry that you want to edit in the Access Points list,
2. Edit the security key and/or Network ID, and click
Save
to save the changes in the
“whart_provisioning.ini” file.
Considering Note 1 above, if you change the EUI64 address of an existing Access Point, the Network
Manager will recognize it as a new entity and will add the new Access Point to the current list.
Considering Notes 2 above, if you edit an Access Point, it will be removed from an existing network
and the devices in that network will be unable to join the network, unless you edit the same
parameters for all the field devices in that network.
To delete an Access Point:
1. Select the desired Access Point in the list and click
Delete
,
2. You will be asked for confirmation. Click
Yes
to delete the Access Point or
No
to abort the
action.
Summary of Contents for NIO200 HAG
