Nexcom NIO200 HAG, User Manual

Page: 23 / 120

NIO200 HAG User Guide Page 23 of 120
To search for devices based on their tag, type the tag in the Device Tag input field, and click Search .
Note that the tag field is case sensitive .
To delete the search parameters, click Reset .
3. Search by device state only:
To display devices based on their state at a given time, select the desired state from the Show
Devices drop-down list. The device list will update automatically.
You can choose between two states:

Registered
– the device has successfully joined the network and is ready to operate,



Unregistered
– the device has lost connection with its neighbors in the network.

6.3.2. Device List
The Device list shows the network devices in a table, one item per line, with main information about
each logical device:

EUI-64 address (the MAC address),



Nickname
– the short address,



Device tag,



Device role (Gateway, Network Manager, Access Point, Field Router) and model
(manufacturer information),



Status (“Full Join” for registered devices; “Not Joined” for unregistered devices ), and



Last Read (the date and time of the last reading from the device) and a link to the Readings
page for the device in question.

In addition, the device list provides a quick link to the Run Commands page for that specific device.