NIO200 HAG User Guide
Page 51 of 120
To delete a device / multiple devices:
1. Select the desired entry in the list and click
Delete
,
2. You will be asked for confirmation. Click
Yes
to delete the device(s) or
No
to abort the action.
After you perform any of the above operations, click
Activate
to load the changes into the Network
Manager. The changes will be visible in the network topology and where applicable in the device list.
Loading a List of Devices:
You can add multiple devices at the same time by importing them from a file. The file will contain a list
of devices with the <EUI64>, <Key>, and <NetworkID> when appropriate, comma separated values.
To load a list:
1. Click on
Browse
to locate the text file that you wish to load, and click
Upload
,
2. Click
Activate
, to load the new device list into the Network Manager. The current
“whart_provisioning.ini” file will be overwritten and all previous settings will be lost.
Exporting the Settings
This page also enables you to export the configuration settings, by clicking
Save
in the “Manage
device list” section.
Summary of Contents for NIO200 HAG
