Nexcom NIO200 HAG User Manual Download Page 25

Page: 25 / 120

NIO200 HAG User Guide

Page 25 of 120

6.4.1

Information

The Information pane displays general as well as activity specific information about the device.

When the page is loaded, it shows the latest information available.

The following details are shown in addition to those already indicated in the device list:



Manufacturer

– the name of the device manufacturer,





Model

– the model/type of the device,





Revision

– the radio firmware version,





Power Status

– not available in the current version,





Data transmission statistics

– the number of transmitted/received packages and the

number of failed transmissions/receptions,





Burst messages

– the definition of burst messages that the device will publish to the

Gateway.



Burst messages

Burst messages are used to publish data to applications, in general to the Gateway, which is

the entity providing access to the WirelessHART network and caching the data reported by

devices.

Summary of Contents for NIO200 HAG

























































































































Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands

Nexcom NIO200 HAG, User Manual

Search results

Summary of Contents for NIO200 HAG

Reviews:

Related manuals for NIO200 HAG

Brands by name

Popular brands