NIO200 HAG User Guide
Page 47 of 120
Under General Settings:
Specify the tag of the Network Manager.
Note: If you change this setting, you must restart the Network Manager in order for the new setting to
take effect.
Under Operational Settings:
Fill in the bandwidth fields with the desired/appropriate values;
Enable/Disable Compatibility Mode for the old Emerson devices starting with revision 2;
Enable/Disable Dynamic Management Bandwidth for the Network Manager to dynamically
adjust devices bandwidth.
Under Channel maps:
Enable the desired frequency channels for communication with the network devices for each
Network ID. Click
Add
for a new Network ID* or to remove it.
If you are using more than one Network
ID be sure that each channel is used only by one network.
When you have finished editing the settings, click
Save
.
Summary of Contents for NIO200 HAG
