Newport New Focus Picomotor 8743-CL, User Manual

Page: 18 / 133

18 Introduction
1.2.3 Summary of Warnings and Cautions
The following general warning and cautions are applicable to this instrument:
WARNING
The Picomotor Controller/Driver is incomplete in constructional
features and is considered only to be a component for the
purposes of regulatory compliance. It is “equipment for building
in;” a suitable enclosure must be provided so that the unit is not
user accessible when incorporated into the final product.
WARNING
The Model 8743-CL Picomotor Controller/Driver internally
generates non-SELV voltages. These voltages are present, at
times, on the Picomotor connectors even when a Picomotor is
not connected. The user shall mount the Model 8743-CL with
appropriate barriers, spacings, markings, etc. to ensure that all
applicable regulatory requirements are met. THIS IS THE
USER’S RESPONSIBILITY.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact New
Focus technical support for advice before attempting to plug in
and operate damaged equipment.
WARNING
The Model 8743-CL is intended for use ONLY with New Focus
Picomotors. Connection of other devices to the unit’s motor
connectors may cause damage to the unit or the connected
device, fire, and/or personal injury.
WARNING
Before operating the Model 8743-CL Picomotor Driver, please
read and understand all of Section 1.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact New
Focus technical support for advice before attempting to plug in
and operate damaged equipment.