Newport New Focus Picomotor 8743-CL, User Manual

Page: 120 / 133

120
ZZ
Description
Configuration register set
Syntax
ZZ nn
Remarks
This command is used to configure the default behavior of some of the controller’s features. It
is typically followed with an SM (Save to Memory) command.
Bit Value Definition
0 0* Perform auto motor detection. Check and set motor type automatically when
commanded to move.
1 Do not perform auto motor detection on move
1 0* Do not scan for motors connected to controllers upon reboot (Performs ‘MC’
command upon power-up, reset or reboot)
1 Scan for motors connected to controller upon power-up or reset
2 0* Do not initiate absolute position search following controller reset
1 Initiate absolute position search following controller reset
Example:
ZZ 1; SM (Disable automatic motor check and save to memory)
ZZ 3; SM (Disable motor check on move, check motors on system reset)
See Also
*RCL, MC
ZZ?
Description
Configuration register query.
Syntax
ZZ?
Remarks
This command is used to query the configuration register setting.
Response Value Description
nn
Integer Configuration register.
Example:
ZZ ? (Get configuration register settings)
1 (Returns 1; bit-0=1 & bit-1=0; means auto motor detection on move is disabled)
See Also
ZZ