![Newport New Focus Picomotor 8743-CL User Manual Download Page 123](http://html1.mh-extra.com/html/newport/new-focus-picomotor-8743-cl/new-focus-picomotor-8743-cl_user-manual_1679963123.webp)
123
IPADDR
Description
IP address set.
Syntax
IPADDR
address
Remarks
This command is used to set the controller’s internet protocol (IP) address. An IP address
consists of four numbers, each of which contains one to three digits, with a single dot (.)
separating each number or set of digits. Each of the four numbers can range from 0 to 255.
In order for this setting to take effect, please set the controller to Static IP mode, save (SM) this
parameter in the controller’s non-volatile memory, and reset (RS) the controller to take affect.
NOTE: Send this command via USB interface as Ethernet communication may become
unstable during Ethernet settings configuration. While connected via USB, use
the Picomotor application software to send commands (Go to ‘Terminal’ tab).
Argument
Value
Description
address
nn1.nn2.nn3.nn4
IP address. (Example. 192.168.1.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
Example:
IPMODE 0
(Set to static IP mode)
GATEWAY
192.168.10.101 (Set gateway address)
NETMASK 255.255.255.0
(Set Netmask address)
IPADDR 192.168.1.101
(Set IP address)
SM; RS
(Save and reset system)
See Also
IPMODE, SM, RS
IPADDR?
Description
IP address query.
Syntax
IPADDR?
Remarks
This command is used to query the controller’s IP address
Response
Value
Description
address
nn1.nn2.nn3.nn4
IP address. (Example. 192.168.1.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
Example:
IPADDR 192.168.1.101;SM;RS
(Set IP address, save, and reset system)
IPADDR?
(Get IP address)
192.168.1.101
(Returns 192.168.1.101; IP address)
See Also
IPMODE, IPADDR, SM, RS
Summary of Contents for New Focus Picomotor 8743-CL
