Newport New Focus Picomotor 8743-CL, User Manual

Page: 121 / 133

121
ETHERNET RELATED COMMANDS
GATEWAY
Description
Default gateway address set.
Syntax
GATEWAY address
Remarks
This command is used to set the Ethernet default gateway address. In order for this setting to
take effect, please set the controller to Static IP mode (IPMODE), save (SM) this parameter in
the controller’s non-volatile memory, and reset (RS) the controller.
NOTE: Send this command via USB interface as Ethernet communication may become
unstable during Ethernet settings configuration. While connected via USB, use
the Picomotor application software to send commands (Go to ‘Terminal’ tab).
Argument Value Description
address nn1.nn2.nn3.nn4 Gateway address. (Example. 192.168.10.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
Example:
IPMODE 0 (Set to static IP mode)
GATEWAY
192.168.10.101 (Set gateway address)
NETMASK 255.255.255.0 (Set Netmask address)
IPADDR 192.168.1.101 (Set IP address)
SM; RS (Save and reset system)
See Also
IPMODE, SM, RS
GATEWAY?
Description
Default gateway address query.
Syntax
GATEWAY?
Remarks
This command is used to query the default gateway address
Response Value Description
address
nn1.nn2.nn3.nn4 Gateway address. (Example. 192.168.10.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
Example:
GATEWAY? (Get gateway address)
192.168.10.101
(Returns
192.168.10.101;
gateway address)
See Also
IPMODE, GATEWAY