INVERTER-POWERED COMPONENT TROUBLESHOOTING
If your entertainment components or certain appliances are not working, such as television, DVD player, satellite
system, refrigerator, or microwave, Newmar recommends checking the breaker on the inverter, which may be located in
a compartment or between the chassis frame rails.
ANTENNAS, CABLE, AND SATELLITE SYSTEMS
Your unit may be equipped with an exterior antenna jack and interior antenna jacks or wiring at each
television location. Depending on your coach year, model, and options, several antennas have been
used.
An antenna with a power booster may be installed in your coach and is designed for reception of all local color and
black-and-white channels. The antenna may be automatic, stationary, or manual lift. The power booster supplies voltage
to the antenna when using over-the-air signal. However, it transfers the connection from the antenna to park cable when
it is available and connected.
OVER-THE-AIR SIGNAL
If the reception is poor, make sure the power switch for the power booster is in the “ON” position and all of the coax
connections are tight. This switch is usually located beside the passenger chair or on the video selector box (select units
only).
CABLE CONNECTION
An exterior cable jack and receptacle may be available on your coach. If installed, they may be located in an outside
storage compartment, usually near the power cord. When using park cable, it is necessary to turn the antenna booster
off in order to allow the signal to travel to the television or selector switch (if equipped). This switch is usually located
beside the passenger chair; it can also be the power button on the video selector box (select units only).
IMPORTANT
Failure to turn off the power booster switch to the antenna while using the park cable system may cause poor
picture quality.
FOR MORE INFORMATION
Refer to the product manufacturer's owner's manual and links in Newgle to learn more about your coach's antenna,
cable, and satellite system.
BLU-RAY PLAYERS
Blu-ray players offer full HD 1080p blu-ray disc playback. Many players also offer other features like
streaming and a variety of applications.
OPERATING THE BLU-RAY PLAYER
1. To operate your blu-ray player, turn it on using the remote or on the face of the player.
2. To insert a blu-ray disk, press the OPEN button, followed by the CLOSE button.
3. Press the PLAY button on the remote or on face of the player.
4. Make sure the proper source is selected on the television to view the blu-ray disk.
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
76