
Home Screen for Coaches Equipped with Floor Heat
Home Screen for Coaches Not Equipped with Floor Heat
MODULES
RV-C is a network of modules that share common language and procedures. Some of the modules controlled by the
RV-C include AC (120 Volt) and DC (12 Volt) Power, Generators, Water Tanks, Climate, Temperature, and Floor Heat.
SIGNALS
When a module sends a command to the system, it is authenticated to ensure that the message has been received
correctly and is not corrupted in any way. This means that the systems are less likely to malfunction. The RV-C verifies
the signals it receives prior to sending them, which is a distinguishing characteristic of the RV-C system. Older
technology would simply send the signal.
TECHNICAL SUPPORT
Provides the proper procedures for contacting Technical Support when there is an issue with the SilverLeaf system.
Follow these simple steps prior to calling Technical Support:
1.
Verify the issue.
Be sure it is an issue with the system and not operator-error.
2.
Check the displays.
Make sure the HMS365 or VMS350 displays have not been reset to factory default
settings. Check the labels on the zones. For example, if a display has been reset to the default, the label on the
zones would be changed from "Living Room" to "Zone 1."
3.
Verify the coach information.
Be sure to have the Newmar coach serial number (six digits) and the last
seven digits of the Vehicle Identification Number (VIN) to ensure the Support Representative can accurately
identify the coach.
CAUTION
Never reset any of the system components to factory defaults. The modules should be programmed correctly
by the manufacturer. Resetting any of the SilverLeaf components may cause physical damage to various
systems on the coach, which could cause physical injury.
When in doubt, call Newmar Technical Support for assistance, especially if you suspect that your issue may be
software-related. Software and firmware updates can often resolve any issues you may face. Your representative can
guide you through the best solution for troubleshooting, and, if necessary, replacing the modules at an Authorized
Service Center.
HOME
The Home screen displays prioritized system status messages and warnings and provides access to all main functions
controlled by SilverLeaf. These functions are accessible by tapping one of the buttons on the Home screen. Pressing
the Home button from any of the display screens will return the user to the initial Home screen.
LEFT COLUMN BUTTONS
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
156