WARNING
Driving through water deep enough to wet the brakes may affect the stopping distance or cause the vehicle to
pull to one side. If you have driven through deep water, check the brake operation in a safe area to be sure
they have not been affected.
WARNING
Never operate a vehicle if a difference in braking efficiency is noticeable. Extreme terrain and adverse weather
may affect the handling and/or performance of your vehicle.
SEAT BELT SAFETY
One of the most important safety features in your vehicle is the restraint system. Research has shown that seat belts
save lives. And they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when
people are thrown from the vehicle. Everyone in a motor vehicle needs to be buckled up at all times.
IMPORTANT
These brief operation instructions are for quick reference only. Any quick start instructions provided should
not take the place of the complete Operation Manual provided by this item's manufacturer.
WARNING
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and is
using a seat belt properly.
HOW TO OPERATE YOUR SEAT BELTS AND RESTRAINT SYSTEM
WARNING
If you wear your safety belt improperly, both the effectiveness and comfort will decrease.
OPERATING INSTRUCTIONS FOR LAP/SHOULDER COMBINATION RESTRAINTS
1. Enter the vehicle and close the door. Sit back, and adjust the seat.
2. The latch plate of the belt is above the back of your seat. Grasp the latch plate, and pull out the belt. Slide the
latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.”
4. Position the lap belt across your thigh, below your abdomen. If you need the lap portion tighter, pull up a bit on
the shoulder part. A snug belt reduces the risk of sliding under the belt in a collision. Position the shoulder belt on
your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt.
5. To release the belt, push the release button on the buckle.
NOTICE
Some shoulder belts can be adjusted upward or downward to help position the belt away from your neck.
Push on the anchorage cover to release it, and then move it up or down to the position that serves you best.
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
11