© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
82
ELECTRONICS
DAY/NIGHT (4)
•
Switch between day and night mode.
MENU (5)
•
Primary Function: Press MENU button to enter the
OSD.
•
Secondary Function: While in menu modes, the MENU
button is used to return to the previous menu.
SELECT (6)
•
Primary Function: Press SELECT button sequences
source input modes from CH1 to CH3.
•
Secondary Function: While in menu mode, the
SELECT button is used to select the highlighted
function or option setting.
Refer to the Voyager owner manual for additional
functions and setup instructions.
Source(s): Voyager VOM718 7” Color TFT LCD 3 Camera Mirror Monitor Owner’s
Manual
Product(s): This source is associated with more than one product. Refer to Newgle
for more information about the product(s) offered for your coach’s model year.
Holding Tank Monitoring Systems
The monitor panel allows you to check the approximate levels in the fresh, gray, and black water holding
tanks, as well as propane levels (if equipped), and the battery condition. The monitor panel is generally
located in the front overhead cabinet, or above or near the entrance door. An additional monitor panel may
be located in the basement water compartment.
E
F
Precision Circuits Holding Tank Monitoring Systems
Operation (Model: Digi-Level)
This article provides basic operation instructions for a Precision Circuits Digi-Level Holding Tank Monitoring System.
The monitor panel allows you to check the approximate
levels in the fresh, gray, and black water holding tanks,
as well as propane levels (if equipped), and the battery
condition. The monitor panel is generally located in the
front overhead cabinet, or above or near the entrance
door. An additional monitor panel may be located in the
basement water compartment.
Digi-Level Screens
TANK LEVELS SCREEN
Press the “Levels Check”
button to check the tank
level statuses. The levels will
show on the digital display.
The screen will continually update every second, and the
level sensors are continually communicating. Should a
sensor exceed normal limits, “ERR” will display in place
of the level. Depending on the RV, the levels will be
displayed in either 1/3’s or 1/4’s.
•
E, 1/3, 2/3, F, or ERR; or
•
E, 1/4, 1/2, 3/4, F, or ERR.
VOLTAGE SCREEN
The chassis and house
battery voltages will
display in both digital and
analog (bar graph) format.
The analog range is 10.0 volts to 15.0 volts, with bar
graph meter increments of 0.125 volts. The screen will
continually update every second. Below are some guides
to determine the battery charge state:
•
Over 13.0 volts, the battery is being charged.
•
If no appliances, lights, Inverter, etc are on, a battery
at rest voltage will have an approximate battery
charge state range from 11.8 volts (0% charge) to 12.8
volts (100%).
The Digital Monitor Panel digitally displays the levels of
the Water and Waste Tanks, and L.P. Tank. It provides both
a digital and analog Battery Volt Meter.
To conserve battery power, after one minute, the
backlighting will turn off, and the display will return to a
default screen. However, the panel is still live. Touching
the button will display the level and also turns on the
backlighting again.
Overview
Summary of Contents for Bay Star 2022
Page 1: ...SM 2022...