© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
173
SLIDEOUTS
Manual Operation of Room
Refer to the Manual Operation Instructions located on the kitchen overhead cabinet.
Slideout Safety
WARNING
!
Do not allow children to operate the slideout. Do
not allow any person to place their arms, legs, body
or head between any pinch point of the lock arms,
slideout fascia, interior walls, exterior walls, objects,
or floor as serious injury or death could result. Any
adjustments, or repairs, must be made only by
“Newmar” qualified personnel. Always check the
interior and exterior of the coach for objects, or
persons, that are in the path of the slideout when
extending or retracting the room. Always check the
room to be sure any objects, or debris, are removed
before retracting the room. Operator must remain
continually in control of the slideout room control
switch while the room is moving in or out.
WARNING
!
Be sure that the driver’s seat is in the forward
position before activating the slideout room.
Electric Slideout Maintenance
This article provides care and maintenance information for the electric slideout. Electric slideout drive mechanisms do not
require lubrication as part of the scheduled maintenance. Some noise is normal during extension and retraction from the
various moving parts and seals.
Newmar does not recommend the use of grease,
silicone, or WD-40 on the slideout tubes or chains, as
these products tend to collect dirt and dust.
IMPORTANT
!
If lubrication is desired on chains, rollers, or tubes,
Newmar recommends using a light coat of LPS 1
Greaseless Lubricant, which provides a dry, thin
lubricating film that is resistant to dirt and dust buildup.
If slideout seal lubrication is necessary, the slideout seal
provider (Clean Seal) recommends using a silicone-based
spray or water-based 303 protectant on the rubber
slideout seals. They state this will not hurt the seal. They
also stated that baby powder could be used but would
need to be applied frequently, as it would wash away. The
silicone base spray would last longer and would not need
to be applied as often. Newmar recommends bi-annual
treatment of slideout seals.
Chains, Rollers, and Tubes
Seals
In addition, the torque on all electric slideout motor
mounting bolts should be checked annually by an
Authorized Newmar Service Center.
Motor Mounting Bolts
Summary of Contents for Bay Star 2022
Page 1: ...SM 2022...
