© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
30
APPLIANCES
WARNING
!
Like any remote control unit, the remote control unit
included with your fireplace may unwantedly affect
or control other electric products such as TVs. If
this occurs, refer to the complete fireplace owner’s
manual in Newgle for complete troubleshooting
information.
CLEANING
•
To remove dust from glass window, use clean dry cloth.
•
To remove fingerprints or other marks from glass
window, use clean damp cloth. Do not spray glass
cleaner or other liquids directly onto the window.
•
Clean metal surfaces with a clean damp cloth making
sure not to push dust or debris into any air intake or
exhaust vents.
•
Do not use abrasive cleaners or spray liquids on any
part of the appliance.
•
Periodic cleaning/vacuuming of the fan/heater unit is
strongly recommended to ensure that no dirt or foreign
objects build up.
REPLACING REMOTE CONTROL
BATTERY
If the remote control stops functioning or operates poorly,
the battery should be replaced with a new one (Mode #
CR2025).
1.
The battery compartment can be found on the back
side of the remote control.
2.
Press and slide the battery door to open and remove
the old battery.
3.
Insert a new CR2025 coin battery, making sure that the
polarity “+” and “-” matches properly.
4.
Close the battery door.
Source(s): F2655BCFW Greystone Operating and Troubleshooting Guide
Product(s): Greystone 26” Flat Electric Fireplace (Model: F2655BCFW,
Newmar Part Number: 154052)
Zero Clearance Safety
Technology
The electric fireplace has zero clearance safety
technology. With the advanced zero clearance safety
sensor, if there is something covering or closing the slide
outs, after about 20 seconds, the appliance will switch off
power automatically. Then pull the plug out and let the
appliance cool down for three minutes. Plug the power
cord in again and the fireplace will begin working again.
Maintenance
WARNING
!
Before attempting to perform any maintenance on
this appliance, turn all controls to the “OFF” position
and unplug. Allow the appliance to be “OFF” for at
least 10 minutes before performing any maintenance
in order to allow all components to cool properly.
Microwaves and Convection Ovens
A modern convenience to keep up with even your busiest of travel days. Newmar offers a variety of
microwave and convection oven choices to meet your needs and wants to make cooking quick and
convenient.
•
To change the flame color on
manual button, hold down the flame
button for 3 seconds. The coal bed
flame will change from Yellow to
Red.
•
Hold down the flame button for
3 seconds again. The flame will
change from Red to Blue.
•
Hold down the flame button for
3 seconds again. The flame will
change from Blue to Yellow and
Blue.
•
Hold down the flame button for a
third time for 3 seconds. The flame
color will come back to Yellow.
HEATER BUTTON
Press once to activate the low heat setting. Press the
button a second time to activate the high heat setting. And
a third time to activate the “Auto” function.
TEMP BUTTON
The highest temperature of thermostat is 82°F and the
lowest is 62°F. Once the heater is activated, the display
screen will display the heater setting in use.
TIMER BUTTON
Press once to activate the TIMER. Use the timer to have the
unit turn off automatically after 1 hour, up to 8 hours. The
display screen will display the setting shortly.
Summary of Contents for Bay Star 2022
Page 1: ...SM 2022...
