© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
72
ELECTRICAL
Battery Mode
In Battery Mode (also called Inverter Mode), the AC output
power comes from the battery. The LCD Screen switches
to displaying battery mode information such as:
OPERATING IN BATTERY MODE
The Freedom X is in Battery Mode (also called Inverter
Mode) when all the following conditions exist:
•
inverter power button is ON (down position) or
ignition auto-on is activated
•
shore power is not presently available
•
battery has sufficient power
Inverter operation means that DC battery power is
presently being converted to utility grade AC power,
powering equipment and appliances connected to the AC
output terminal of the unit.
The green status LED lights up to
indicate the Freedom X is using the
battery to power the equipment
and appliances.
VIEWING INFORMATION DURING
BATTERY MODE
The LCD screen displays Inverter information as well
as feature settings in coordination with the LED lights
alongside the screen.
•
Press the Scroll UP button to toggle between the
following basic information:
INPUT VOLTAGE/OUTPUT VOLTAGE
•
Default screen
•
Shore power voltage = 80V
•
Output voltage = 120V
BATTERY VOLTAGE/BATTERY
DISCHARGE CURRENT
•
Battery voltage = 13.1V
•
Battery discharge current = 80A
LOAD PERCENT
•
Load = 20%
WARNING/FAULT
•
If a fault or warning is detected, this screen becomes
the default screen.
•
Error code = E02 “DC Input Over Voltage shutdown”
Idle Mode
When there is no AC output such as when an error or fault
condition is detected, the Idle Mode is displayed on the
LCD Screen. An example is shown below:
For definitions on battery capacity, load level, and error
code indicators, refer to the “LCD Screen Icons” section.
Turning Inverter Operation On
and Off
There are two ways to operate the Freedom X’s inverter.
•
Press the inverter Power button to a down position (it
is Off in the up position).
•
When the inverter’s Ignition Control feature is set to
Auto-on, and the Ignition Control switch is enabled
and, a +12VDC signal is present.
When the Freedom X’s inverter
Power button is turned ON and the
AC source is outside the operating
range or is disconnected, the
transfer switch automatically
switches to Battery Mode.
Summary of Contents for Bay Star 2022
Page 1: ...SM 2022...
