© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
107
ENTERTAINMENT SYSTEMS
1. If there is no signal after turning on the television,
push the Home button on the remote.
This article provides the basic programming instructions for Samsung Air TV.
Samsung Air TV Programming
2. Use the left arrows until “Settings” appears on screen.
Push “Select.”
3. Scroll down to “Broadcasting,” and push “Select.”
4. When “Auto Program” is highlighted, push “Select.”
5. Highlight “Start,” and push “Select.” The TV will search
for local channels and store them.
These steps will need to be completed each time the
coach is moved to a new location.
NOTICE
!
Television Lifts
Television Lift Operation via Control Switch
This article provides basic operation instructions for a television lift (televator) via a control switch.
Operation
1. Press and release the Televator
Switch to move the lift in the
desired direction.
2. The lift will continue in the
selected direction until it reaches
the end of travel. If you need
to stop it at any time during the
travel process, press the switch
again in either direction.
3. Under normal operation, the user will raise the
televator to watch the TV, then lower it before
traveling. However, when raising the televator and
then immediately lowering it, the switch may need to
be pressed a second time, as the control circuit timer
may still be active.
Televator control switches and touchscreen buttons
should be pressed and immediately released. Do not
continue to hold the UP or DOWN switch or button,
as this may cause the television lift to enter into
programming mode.
NOTICE
!
Summary of Contents for Bay Star 2022
Page 1: ...SM 2022...