Neumo 66TX51341313131, Operating & Installation Instructions Manual

Page: 62 / 92

Container Cleaning System TANKO®EX-R64T
54/80 Translation - Operating/installation instructions 2020/03 6 Start-up
WARNING
Danger of injuries caused by the cleaning medium returning!
If the cleaning medium returns after a system failure (e.g. pressure drop due to
interruption of the pressure supply) there is a risk of accident.
There is a risk of death or severe physical injury.
 Do NOT remove the device if the cleaning medium has failed.
 Always comply with the switch-off procedure (see Section 7.2 Switch-off Procedure ).
When operating the device, adhere to the following additional instructions:
WARNING
Persons in the container. A person could be hit by a jet from the cleaning head!
There is a risk of death or severe physical injury.
 Do NOT start cleaning while there are persons in the container.
 NEVER point the cleaning jet or surge at persons.
WARNING
Incorrect operation of the device!
There is a risk of death or severe physical injury.
 Only operate the device in perfect condition.
 Only operate the device installed inside a closed container.
 Drain and depressurize the container to be cleaned.
 Close all openings on the container (e.g. inspection openings) firmly.
 When operating the device, adhere to the switch-on and switch-off procedures
(see
Sections 6.3 Switch-on Procedure and 7.2 Switch-off Procedure ).
 There is no need for the device to be run in.
 The following operating states of the device are NOT permitted:
–
Operation of the device without cleaning medium.
–
Immersing the device in the product of the production process.
–
Operation of the device outside the permitted parameters
(see
Section 3.3 Technical Data ).
–
Operating the device with air or gas for a longer period (several minutes)
 Immediately stop operation in the event of any leaks outside the container.
 Refrain from any type of work which compromises the safe and reliable function of the device.
 Immediately inform the owner of any changes to the device or the plant that could impair its safety.
If you notice vibrations on the plant that are NOT caused by the device during start-up of the device, these
must be prevented by suitable measures so that the vibrations CANNOT be transferred to the device.
If that is NOT possible, the maintenance intervals must be shortened in accordance with
Section 7.4.1 Maintenance Intervals .
During normal operation of the device, you must make sure that the mixture of supplied cleaning
medium and dissolved substances can flow freely out of the container.