Container Cleaning System TANKO®EX-R64T
72/80
Translation - Operating/installation instructions 2020/03
8 Faults
Source:
–
DIN EN 60204-1 / VDE 0113-1 “Safety of machinery – Electrical equipment of machines –
Part 1: General requirements”
–
DIN EN ISO 13850: “Safety of machinery - Emergency stop - Principles for design”
In an Emergency:
Trigger the EMERGENCY STOP function at the higher-level plant/machine.
Actuate the EMERGENCY STOP switch
Interrupt the drive energy supply
–
Disconnect the power supply (e.g. electric actuator)
–
Switch off higher-level main switch
–
Pull out the power plug
–
Close the compressed air shut-off valve (e.g. pneumatic actuator)
Disconnect the supply of cleaning medium (actuator energy)
–
Close the shut-off valve
