Container Cleaning System TANKO®EX-R64T
6 Start-up
Translation - Operating/installation instructions 2020/03
51/80
WARNING
Risk from sudden, unforeseeable or unauthorized activation of the device (e.g. triggering
of a start command as a result of incorrect operation of a start-up control device)!
There is a risk of death or severe physical injury.
During start-up of the device, it is essential to perform the following work steps in the
specified order.
Switch-on procedure
1.
Firmly close all openings on the container (e.g. inspection openings).
2.
Empty and depressurize the container.
3.
Switch on the electrical power supply.
Check to make sure that the electrical power supply is NOT disconnected and that
voltage is applied to the sensors.
Take suitable measures to secure the electrical power supply to prevent it from
being switched off suddenly, unexpectedly or without authorization.
4.
Switch on the cleaning medium supply (e.g. slowly open the shut-off valve or ball cock).
Check that the supply of cleaning medium is NOT interrupted and the media
pressure is established at the device.
Take suitable measures to secure the supply of cleaning medium to prevent it from
being switched off suddenly, unexpectedly or without authorization.
