Container Cleaning System TANKO®EX-R64T
2 Safety
Translation - Operating/installation instructions 2020/03
11/80
The preferred installation position of the device (see
The device could vibrate while the container is being cleaned. Any other vibrations must be avoided
(see
Section 7.4.1 Maintenance
The device is designed for a fixed pipe installation only. Installation on a hose is PROHIBITED.
Non-intended Use
The device is NOT suitable for the following applications:
The device is NOT suitable for private use.
The device is NOT suitable for use outside containers.
Holding the device with your hand during operation is PROHIBITED.
The device must NOT be immersed in the product of the production process (NOT even partially).
This could cause the product to penetrate the device. The spray holes of the attached cleaning
devices could become blocked. The free movement of the actuator could be obstructed.
The device must NOT by operated with gases (e.g. air) over a long period, as the cleaning medium is
used for lubrication of the bearings.
This device is intended exclusively for the purpose outlined above. Any other use beyond that described
here or any conversion of the device without a written agreement with the manufacturer is considered
IMPROPER use.
The manufacturer accepts NO liability for damage arising from such improper use. The owner bears the
sole risk.
The device must not be put into operation until it has been assured that all the safety equipment is in
fully working order and the plant in which the device is installed meets the safety requirements of all
relevant European directives (e.g. the Machinery Directive).