background image

432-0003-00-10 Rev 150 M-Series Operator’s Manual 

1

CHAPTER 1 

M-Series Overview

......................................................................5

Additional References

..................................................................................................... 6

Documentation Conventions

........................................................................................... 6

Warnings and Cautions.

.............................................................................................. 6

System Description.

.................................................................................................... 7

M-Series Gimbal Assembly

............................................................................................ 8

Joystick Control Unit (JCU)

............................................................................................. 9

Multiple Cameras, JCUs, and Other Devices

................................................................. 9

Video Display.

............................................................................................................ 10

Thermal Imaging

........................................................................................................... 10

Video Screen Icons

....................................................................................................... 11

CHAPTER 2 

M-Series Joystick Control Unit

..................................................15

JCU Introduction.

....................................................................................................... 15

JCU Buttons.

............................................................................................................. 15

Power/DIM Button

......................................................................................................... 16

MENU Button

................................................................................................................ 16

USER Button

................................................................................................................ 17

SCENE Button

.............................................................................................................. 17

COLOR Button

.............................................................................................................. 18

HOME Button

................................................................................................................ 18

Special Button Functions

.............................................................................................. 19

Button Summary

........................................................................................................... 19

JCU Puck.

................................................................................................................. 20

Tilting the Camera

......................................................................................................... 21

Panning the Camera

..................................................................................................... 21

Zooming the Camera

.................................................................................................... 21

Freezing an Image

........................................................................................................ 22

JCU Display.

.............................................................................................................. 22

CHAPTER 3 

M-Series System Startup

...........................................................23

System Startup and Shutdown.

................................................................................. 23

The Bootup Process.

................................................................................................. 23

Standby Mode.

.......................................................................................................... 25

Contents

www.netzerotools.com

www.netzerotools.com

Summary of Contents for FLIR M-SERIES











































































Reviews: