432-0003-00-10 Rev 150 M-Series Operator’s Manual
15
CHAPTER 2
M-Series Joystick Control
Unit
JCU Introduction
The JCU is the primary method of controlling the M-Series camera. You use it to
move the camera (pan or tilt), electronically zoom the camera, switch between
infrared and visible-light cameras, adjust the image settings, and access the
on-screen menus.
This chapter describes how to use the JCU buttons to operate the camera
features. Some of these features vary depending on the specific way your system
has been configured. The various configuration settings and how they affect
operation are all discussed in Chapter 4, "M-Series System Configuration," on
page 31. When specific settings affect a particular button, you can refer to that
chapter for additional details.
JCU Buttons
All of the buttons on the JCU perform multiple functions. In most cases, each
performs one function when it is pressed briefly (short press) and a different
function when it is pressed and held (long press). This flexibility enables a simple
device to support a set of complex, rich features.
www.netzerotools.com
www.netzerotools.com
