M-Series Joystick Control Unit
16
432-0003-00-10 Rev 150 — M-Series Operator’s Manual
In the following discussion, the short press action is described first, followed by
the long press. In addition, enabling some system features can affect how the
buttons work. Table 2.1 on page 19 summarizes the two actions for each button.
Power/DIM Button
Short Press
A short press of the Power/DIM button cycles through the four levels of
brightness for the JCU display. The JCU controls are backlit to make them easier
to see at night. Use this button to adjust the brightness of the JCU backlighting
for your comfort.
Long Press
Pressing and holding the Power/DIM button is used to “wake up” the camera,
causing it to go from standby mode to powered on. It is also used to put the
camera back in standby mode as well as complete other system functions such
as calibrating the JCU and associating the JCU with a camera. These functions
are described in more detail on page 23.
MENU Button
In many cases, you will not need to modify the factory default configuration
settings of your system. However, the system gives you many options that you
may want to tailor to your own needs. These settings are available through
on-screen menus. Use the MENU button to turn these menus on or off.
Note:
The MENU button does not have a press and hold action.
When the on-screen menu is displayed, use the joystick puck to navigate through
the menus and select various menu entries. Each menu item is discussed in
detail in Chapter 4, "M-Series System Configuration," on page 31, which explains
how to navigate using the menus in more detail.
Puck
Power/DIM
Display
Home
Scene
User
Menu
Color
www.netzerotools.com
www.netzerotools.com
