M-Series System Configuration
42
432-0003-00-10 Rev 150 — M-Series Operator’s Manual
Scan Width
In surveillance mode, the Scan Width determines the range of horizontal azimuth
(pan) covered by each scan. The choices are:
Narrow.
The camera scans from approximately 20
o
left and right of center
(40
o
total).
Medium
. The camera scans from approximately 40
o
left and right of center
(80
o
total).
Wide.
The camera scan covers 80
o
to the left and right of center (160
o
total).
The default scan width is wide.
Note:
The center of the scan pattern is determined by the direction the camera
is pointing when surveillance is enabled. The scan pattern is not centered about
the home position, unless the camera is in the home position when surveillance
is enabled.
Scan Speed
In surveillance mode, the scan speed determines how quickly the camera scans
back and forth. The choices are fast, medium, and slow.
The scan speed is affected by the zoom state (if the camera is zoomed in, it
scans at a slower rate). The default scan speed is slow; try all three settings to
determine which is best for your installation.
Medium
Narrow
Wide
www.netzerotools.com
www.netzerotools.com
