manualshive.com logo in svg

NETGEAR R6900, User Manual

The NETGEAR R6900 User Manual is your essential guide to harnessing the full potential of this powerful router. With detailed instructions and troubleshooting tips, this manual assists in optimizing your network experience. Download this manual for free from our website, the ultimate destination for all your user manual needs.

Share
Download
background image

The BASIC Home page displays.

4.

Select ADVANCED > Advanced Setup > UPnP.

The UPnP page displays.

5.

Select the Turn UPnP On check box.

By default, this check box is selected. UPnP for automatic device configuration can be enabled or
disabled. If the Turn UPnP On check box is cleared, the router does not allow any device to
automatically control router resources, such as port forwarding.

6.

Type the advertisement period in minutes.

The advertisement period specifies how often the router broadcasts its UPnP information. This value
can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that
control points receive current device status at the expense of more network traffic. Longer durations
can compromise the freshness of the device status but can significantly reduce network traffic.

7.

Type the advertisement time to live in hops.

The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops
are the steps a packet takes between routers. The number of hops can range from 1 to 255. The
default value for the advertisement time to live is 4 hops, which should be fine for most home networks.
If you notice that some devices are not being updated or reached correctly, it might be necessary to
increase this value.

8.

Click the Apply button.

The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router
and which ports (internal and external) that device opened. The UPnP Portmap Table also displays
what type of port is open and whether that port is still active for each IP address.

To refresh the information in the UPnP Portmap Table, click the Refresh button.

Manage Wi-Fi Multimedia Quality of Service

Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link.
WMM QoS is automatically enabled for the router.

WMM QoS prioritizes WiFi data packets from different applications based on four access categories:
voice, video, best effort, and background. For an application to receive the benefits of WMM QoS, WMM
must be enabled for both it and the client running that application. Legacy applications that do not support
WMM and applications that do not require QoS are assigned to the best effort category, which receives
a lower priority than voice and video. Circumstances might occur in which you want to disable WMM QoS.

To disable WMM QoS:

1.

Launch a web browser from a computer or WiFi device that is connected to the network.

2.

Enter http://www.routerlogin.net.

Optimize Performance

68

Nighthawk AC1900 Smart WiFi Router Model R6900

Summary of Contents for R6900


























































































































































































































































Reviews:

No comments

Related manuals for R6900

D-Link DWL-8500AP Administrator'S Manual preview
DWL-8500AP
Brand: D-Link Pages: 168
D-Link AirPremier DWL-7700AP Command Line Interface Reference Manual preview
AirPremier DWL-7700AP
Brand: D-Link Pages: 30
D-Link AirPlus Xtreme G DWL-2000AP Instruction Manual preview
AirPlus Xtreme G DWL-2000AP
Brand: D-Link Pages: 28
H3C MSR 800 Compliance And Safety Manual preview
MSR 800
Brand: H3C Pages: 43
H3C WA510H Installation Manual preview
WA510H
Brand: H3C Pages: 19
TCL HH42CV2 User Manual preview
HH42CV2
Brand: TCL Pages: 23
Asante FriendlyNET FR3002AL User Manual Addendum preview
FriendlyNET FR3002AL
Brand: Asante Pages: 16
AirLive W6184QAX User Manual preview
W6184QAX
Brand: AirLive Pages: 46
3Com 3CRWER101U-75 - Wireless 11g Cable/DSL... Installation Manual preview
3CRWER101U-75 - Wireless 11g Cable/DSL...
Brand: 3Com Pages: 76
Kogan KAWRTBB300A User Manual preview
KAWRTBB300A
Brand: Kogan Pages: 16
Cisco 1130AG - Aironet - Wireless Access Point Quick Start Manual preview
1130AG - Aironet - Wireless Access Point
Brand: Cisco Pages: 48
D-Link NUCLIAS CONNECT DAP-2680 Quick Installation Manual preview
NUCLIAS CONNECT DAP-2680
Brand: D-Link Pages: 48
D-Link DWL-7620AP Quick Installation Manual preview
DWL-7620AP
Brand: D-Link Pages: 24
D-Link DWL-8630AP Quick Installation Manual preview
DWL-8630AP
Brand: D-Link Pages: 24
D-Link DWL-8620AP Quick Installation Manual preview
DWL-8620AP
Brand: D-Link Pages: 24
D-Link DWL-8710AP Quick Installation Manual preview
DWL-8710AP
Brand: D-Link Pages: 25
D-Link DWL-8620APE Quick Installation Manual preview
DWL-8620APE
Brand: D-Link Pages: 26
D-Link nuclias connect DAP-2662 Quick Installation Manual preview
nuclias connect DAP-2662
Brand: D-Link Pages: 12

Brands by name

Popular brands

Load more brands