NETGEAR R6900 User Manual Download Page 15

Page: 15 / 249

•

Reset button. For information about using the Reset button, see

Return the Router to Its Factory

Default Settings

on page 193.

•

Ethernet LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the router to LAN devices.

•

Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the router to a modem.

•

Power On/Off button. Press the Power On/Off button to provide power to the router.

•

DC power connector. Connect the power adapter that came in the product package to the DC power
connector.

USB Port on the Front Panel

The USB 3.0 port is located on the front of the router.

Figure 4. USB port

Product Label on the Bottom Panel

The product label on the bottom panel of the router lists the login information, WiFi network name (SSID)
and password (network key), serial number, and MAC address of the router.

Hardware Overview of the Router

Nighthawk AC1900 Smart WiFi Router Model R6900

Summary of Contents for R6900


























































































































































































































































Search results

Summary of Contents for R6900

Reviews:

Related manuals for R6900

Brands by name

Popular brands

NETGEAR R6900, User Manual

Search results

Summary of Contents for R6900

Reviews:

Related manuals for R6900

Brands by name

Popular brands