manualshive.com logo in svg

NETGEAR R6900, User Manual, Page: 110 / 249

Share
Download
NETGEAR R6900 User Manual Download Page 110

To remove a USB device safely:

1.

Launch a web browser from a computer or WiFi device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > USB Functions> ReadySHARE Storage.

The previous figure shows a USB device attached to the router.

5.

In the Available Network Folders table, select a device.

If a single device is attached to the USB port, the radio button is selected automatically.

6.

Click the Safely Remove USB Device button.

Share a Storage Device Attached to the Router

110

Nighthawk AC1900 Smart WiFi Router Model R6900

Summary of Contents for R6900


























































































































































































































































Reviews:

No comments