NETGEAR R6400v2 User Manual Download Page 92

Page: 92 / 178

Access the Router’s USB Drive Through the Internet

AC1750

Smart WiFi Router

If you did not create a ReadyCLOUD account, see

Create a ReadyCLOUD Account

page

90.

Note:

If the router’s Internet connection mode is set to Dial on Demand, the
router automatically changes the connection mode to Always On. This
change is required for ReadyCLOUD to remotely access the USB
storage device.

The router is registered with ReadyCLOUD.

After registration, visit

http://readycloud.netgear.com

10.

Click the

Sign In

link, enter your ReadyCLOUD user name and password, and click the

Sign In

button.

The ReadyCLOUD page displays the router that you registered and the contents of the
USB storage device that is connected to the router.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands