NETGEAR R6400v2 User Manual Download Page 95

Page: 95 / 178

Use the Router as a Media Server

AC1750

Smart WiFi Router

iPhone or iPad to play music on any AirPlay devices, such as Apple TV or AirPlay-supported
receivers.

Figure 11. Play music on a USB drive with iTunes

Supported music file formats are MP3, AAC, and FLAC. The maximum number of music files
supported is 10,000.



To specify iTunes server settings:

On your iPhone or iPad, find and connect to the WiFi network.

Download the Remote app from the Apple App Store.

Launch the Remote app

from your iPhone or iPad.

The Remote page displays.

Click the

Add a Device

button.

A passcode displays.

Specify the router settings:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands