NETGEAR R6400v2 User Manual Download Page 114

Page: 114 / 178

Specify Network Settings

114

AC1750

Smart WiFi Router

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

In the Address Reservation section, select the radio button next to the reserved address.

Click the

Edit

button.

Change the settings.

Click the

Apply

button.

Your changes are saved.

Delete a Reserved IP Address Entry



To delete a reserved address entry:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

In the Address Reservation section, select the radio button next to the reserved address.

Click the

Delete

button.

The address is removed.

Use the WPS Wizard for WiFi Connections

The WPS Wizard helps you add a wireless computer or device to your WiFi network without
typing the WiFi password.



To use the WPS Wizard:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands