NETGEAR R6400v2 User Manual Download Page 50

Page: 50 / 178

Optimize Performance

AC1750

Smart WiFi Router

The Edit pop-up window opens.

Change the policy settings.

Click the

Apply

button.

Your changes are saved.

Delete an Upstream QoS Policy



To delete a QoS policy:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > QoS Setup > Upstream QoS

The Upstream QoS page displays.

Click the

Setup QoS Rule

button.

The Setup Rules page displays.

Select the radio button for the QoS policy.

Click the

Delete

button.

The QoS Policy is removed from the menu.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands