NETGEAR R6400v2 User Manual Download Page 74

Page: 74 / 178

Share USB Storage Devices Attached to the Router

AC1750

Smart WiFi Router

HTTP

. Enabled by default. You can type

http://readyshare.routerlogin.net/shares

to access the USB drive.

HTTPS (via Internet)

. Disabled by default. If you enable this feature, remote

users can type

http://

<public IP address/shares> (

for example,

http://1.1.10.102/shares) or a URL domain name to access the USB drive over the
Internet. This feature supports file uploading only.

FTP

. Disabled by default.

FTP (via Internet)

. Disabled by default. If you select this check box, remote users

can access the USB drive through FTP over the Internet. This feature supports
both downloading and uploading of files.

If you changed the settings, click the

Apply

button.

Your changes are saved.

Use FTP Within the Network

File Transfer Protocol (FTP) lets you send and receive large files faster.



To set up FTP access:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > USB Functions >

ReadySHARE Storage

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands