ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Link Aggregation
2-5
v1.0, June 2010
e.
Click
Apply
to save the settings.
2.
Add ports to the lag_20.
a.
From the main menu, select Switching > LAG >LAG Membership. A screen similar to the
following displays.
Figure
2-5
b.
Under the LAG Membership Configuration , enter the following information.
Select
Lag 2
in the LAG ID field.
c.
Click the
Unit 1.
The Ports display.
d.
Click on the gray box under port 8 and 9. Two flags appear in the box.
e.
Click
Apply
to save the settings.
Enable Both LAGs
The example is shown as CLI commands and as a Web interface procedure.
CLI: Enabling Both LAGs
By default, the system enables link trap notification
(Console) #config
(Console) (Config)#port-channel adminmode all
(Console) (Config)#exit
At this point, the LAGs could be added to VLANs.
