(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
<cr> Press Enter to execute the command.
<severitylevel>
Enter Logging Severity Level (emergency|0, alert|1, critical|2,
error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index IP Address Severity Port Status
----- ----------------- ---------- ---- -------------
1 192.168.21.253 alert 4 Active
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
16-9
Syslog
v1.0, June 2010
Web Interface: Logging Port Configuration
To use the Web interface to configure the managed switch, proceed as follows:
1.
From the main menu, select Monitoring > Logs >Sys Log Configuration. A screen similar to the
following displays.
Figure
16-9
2.
Enter the following information in the Host Configuration.
•
In the Host Address field, enter your host address
192.168.21.253
.
•
In the Port field, enter
4
.
•
Select
Alert
in the Severity Filter field.
3.
Click
Add
.
