ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Class of Service (CoS) Queuing
10-5
v1.0, June 2010
Show classofservice ip-precedence Mapping
The example is shown as CLI commands and as a Web interface procedure.
CLI: Showing classofservice ip-precedence Mapping
(Netgear Switch) #show classofservice ip-precedence-mapping
IP Precedence Traffic Class
------------- -------------
0
1
1
0
2
0
3
1
4
2
5
2
6
3
7
3
Web Interface: Showing classofservice ip-precedence Mapping
To use the Web interface to show CoS trust mode, proceed as follows:
1.
From the main menu, select QoS > Advanced >IP Precedence Queue Mapping. A screen similar to the
following displays.
Figure
10-3
2.
Select the
All
in the Interface field.
3.
The global IP precedence to Queue mapping is displayed.
4.
Select the specific interface(e.g. 1/0/1) in the Interface field.
