ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
16-7
Syslog
v1.0, June 2010
Web Interface: Showing Logging Trap Logs
From the main menu, select Monitoring –> Logs->Trap Logs. A screen similar to the following displays.
Figure
16-7
Show Logging Hosts
The example is shown as CLI commands and as a Web interface procedure.
CLI: Showing Logging Hosts
(Netgear Switch Routing) #show logging hosts ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) #show logging hosts
Index IP Address Severity Port Status
----- ----------------- ---------- ---- -------------
1 192.168.21.253 critical 514 Active
Web Interface: Showing Logging Hosts
From the main menu, select Monitoring >Logs > Sys Log Configuration. A screen similar to the following
displays.