ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
2-2
Link Aggregation
v1.0, June 2010
Create Two LAGs
The following figure shows the example network.
Server
Subnet 3
Port 1/0/3
LAG_10
Port 1/0/2
LAG_10
Layer 3 Switch
Layer 2 Switch
Subnet 2
Subnet 3
Port 1/0/9
LAG_20
Port 1/0/8
LAG 20
Figure
2-1
CLI: Creating Two LAGs
(Netgear Switch) #config
(Netgear Switch) (Config)#port-channel lag_10
(Netgear Switch) (Config)#port-channel lag_20
(Netgear Switch) (Config)#exit
Use the
show port-channel all
command to show the logical interface ids you will use to identify the LAGs
in subsequent commands. Assume that lag_10 is assigned id 1/1 and lag_20 is assigned id 1/2..
(Console) #show port-channel all
Port- Link
Log. Channel Adm. Trap STP Mbr Port Port
Intf Name Link Mode Mode Mode Type Ports Speed Active
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1 lag_10 Down En. En. Dis. Dynamic
1/2 lag_20 Down En. En. Dis. Dynamic
