ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
IGMP Snooping and Querier
12-8
v1.0, June 2010
CLI: Enabling IGMP Querier
Use the following CLI commands to set up the switch to generate IGMP querier packet for a designated
VLAN. The IGMP packet will be transmitted to every port on the VLAN. The following example enables
the querier for VLAN 1 and uses 10.10.10.1 as the source IP address in querier packets. See the CLI Manual
for more details about other IGMP querier command options.
(Netgear switch) #vlan database
(Netgear switch) (vlan)#set igmp 1
(Netgear switch) (vlan)#set igmp querier 1
(Netgear switch) (vlan)#exit
(Netgear switch) #config
(Netgear switch) (config)#set igmp querier
(Netgear switch) (config)#set igmp querier address 10.10.10.1
(Netgear switch) (config)#exit
Web Interface: Enabling IGMP Querier
1.
From the main menu, select Switching > Multicast >IGMP VLAN Configuration. A screen similar to
the following displays.
Figure
12-7
2.
Enable IGMP Snooping on the VLAN 1.
