ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Managing Switch Stacks
17-13
v1.0, June 2010
Moving a Master to a Different Unit in the Stack
This example is provided as CLI commands and a Web interface procedure.
CLI: Moving a Master to a Different Unit in the Stack
1.
Using the
movemanagement
command, move the master to the desired unit number. The operation
may take between 30 seconds and 3 minutes depending on the stack size and configuration. The
command is
movemanagement
<fromunit-id> <tounit-id>
2.
Make sure that you can log in on the console attached to the new master. Use the
show
switch
command
to verify that all units rejoined the stack.
3.
It is recommended that the stack be reset with the
reload
command after moving the master.
Web Interface: Moving a Master to a Different Unit in the Stack
To use the Web interface to move a master to a another unit, proceed as follows:
1.
Move a master from unit 1 to unit 2.
a.
From the main menu, select System > Management > Basic > Stack Configuration. A screen
similar to the following displays.
Figure
17-5
b.
Select
2
in the Management Unit Selected field.
c.
A warning window is popped up, click the
OK
button
