Figure
9-43
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
9-39
Access Control Lists (ACLs)
v1.0, June 2010
b.
Under Binding Configuration, make the following selection and enter the following information:
•
Select
103
in the ACL ID field.
•
In the Sequence Number field, enter
2
.
c.
Click
Unit 1
. The ports display. Configure the following ports:
•
Click on the gray box under port 24. A flag appears in the box.
•
Click on the gray box under port 48. A flag appears in the box.
d.
Click
Apply
to save the settings.
Set up a MAC ACL with Two Rules
The example is shown as CLI commands and as a Web interface procedure.
CLI: Setting up a MAC ACL with Two Rules
Create a new MAC ACL acl_bpdu.
(Netgear Switch) #
(Netgear Switch) #config
(Netgear Switch) (Config)#mac access-list extended acl_bpdu
