ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
OSPF
6-45
v1.0, June 2010
c.
Enter the following information in the IPv6 Interface Configuration:
•
In the IPv6 Prefix edit box, enter
2001::1
.
•
In the Length edit box, enter
64
.
•
Select
Disable
in the EUI64 field.
•
Select
Disable
in the Onlink Flag field.
•
Select
Disable
in the Autonomous Flag field.
d.
Click
Add
to save the settings.
5.
Enable OSPFv3 on the port 1/0/1.
a.
From the main menu, select Routing > OSPFv3 > Advanced>Interface Configuration. A screen
similar to the following displays.
Figure
6-55
b.
Under IP Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for that
interface. Now 1/0/1 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter
0.0.0.0
.
•
Select
Enable
in the Admin Mode field.
c.
Click
Apply
to save the settings.
6.
Display OSPFv3 neighbor.
a.
From the main menu, select Routing > OSPFv3 > Advanced>Neighbor Table. A screen similar to
the following displays.
